Minggu, 29 Mei 2011

Koleksi Skema Rangkaian Elektronika

Light/Dark Switch With Relay


The circuit as shown act as a light detector. Under normal conditions the resistance of the LDR is high, keeping pin 2 low. When light falls onto the LDR the resistance drops to a couple hundred ohms and triggers pin 2 high which biases the base of Q1 via pin 6 and R4 and in turn activates the relay.Light/Dark switch Circuit with relayAs...
READ MORE...

Refrigerator Door Alarm Circuit Using LDR


The alarm circuit enclosed into a small box is placed in the refrigerator near the lamp. With the door closed the interior of the refrigerator is in the dark, the LDR R2 presents a high resistance thus clamping IC1 by holding pin 12 high. When a beam of light enters from the opening, or the refrigerator lamp illuminates, the LDR lowers...
READ MORE...

Sunday, May 01, 2011


Rangkaian 11-90 hz Subwoofer Filter Using TL072 Op-Amp


The subwoofer filter circuit allows the addition of subwoofers to an existing full-range system, offering adjustable low-pass filtering with optional R6 and R8 boost and mono-summing.Skema Rangkaian 11-90 hz Subwoofer FilterUsing TL072 Op-AmpTL072 Op-AmpThe Subwoofer filter circuit to remove for separate pre amplifier to drive the low...
READ MORE...

6 Band Graphic Equaliser Circuit Using 741 Op-Amp


This circuit is 6 Band Graphic Equaliser ,you can adjust sound in low ,mid and high which circuit used IC 741 Op-Amp. With this circuit you can control and blend frequencies and tones as desired.Essentially, the circuit consists of an IC 741 whose gain at various freguencies is determined by corresponding potentiometer setting.Skema Rangkaian...
READ MORE...

Rangkaian 400W MOSFET Amplifier


These amplifiers circuit can be used for virtually any application that requires high performance, low use Noise, distortion and excellent sound quality. Examples would be subwoofer amplifier should FOH stage Amplifiers, surround a canal a very powerful sound amplifier, etc. The 400W MOSFET-amplifier has four key stages of amplification....
READ MORE...

Audio Peak Level Indicator By Op-Amp


simple circuit PEAK indicator of foliage of the musical signal. This circuit was designed to provide a valuable test equipment tool for sound reinforcement systems like sound amplifiers and the like. The circuit is formed by an input buffer and ac to dc voltage converter (IC1A) feeding a window comparator (IC2A, IC2B, IC2C) which illuminates...
READ MORE...

1 komentar: